Drone Agent Mac OS
Light and tough.
Weighing in at only 875g (1.9lbs), its hard to believe that the Drone 2 is structurally all aluminium. Light and tough.
There are lots of references to the Mac version in the doc, it is basically only a flavour of our UNIX & Linux agent. I recommend you have a look at the doc and search for Mac OS in there, then skip through the list of results. On the -NIX platforms sudo or root privileges are required to perform the kind of introspection the agent is executing. Our drone agent can handle to movement; however, it needs to your helps for shooting. Therefore, you can easily shoot enemies by using left mouse button. Don't hesitate to share your high score to us and to write any feedback. Your feedback is welcome.
A serious barrel
The Shift 2 barrel system used on high end MacDev markers has been modified for release with the Drone 2. The insert system has been removed to create a Shift 2 lite version. The same great performance, with a solid 2 piece design. All parts are compatible with the big brother full Shift 2 so you can easily upgrade to a full insert system later.
New RED engineered drive
The simple, reliable drive on the Drone 2 is now even better, with the new RED drive, with an aluminium construction and increased performance.
Gas through design
Hoses just get in the way – so we took it off. Now you can enjoy greater freedom to hold the gun however you like. Combine that with the matching rubberised barrel and foregrip, and you have a good solid grip on your gun as intended. The more comfortably you can hold your gun, the more accurate you can be – its that simple.
Best of all, Microsoft keeps the OS, security patches, tools, and SDKs updated for us. All of this lets us deliver software faster. How to use VSTS cloud-hosted Mac agents for CI/CD. To use the VSTS cloud-hosted Mac agents, it only takes one click. Simply select Hosted macOS Preview for your build or release pipeline. Our drone agent can handle to movement; however, it needs to your helps for shooting. Therefore, you can easily shoot enemies by using left mouse button. Don't hesitate to share your high score to us and to write any feedback. Your feedback is welcome. Core agent already can be compiled and installed on OS X, however platform subagent in early stage of development. I just started it a week ago, and I think it will be included in 1.2.4 release. In a meantime, you can use SNMP, according to Apple it's included in Server version of OS.
Free yourself from wires
Disconnecting wires? Its so 2013. The Cyborg 6 demonstrated an elegant way of disconnecting your frame from the body without wires – now this technology has been included in the Drone 2 model. It makes dis-assembly and any tech work simpler than any gun out there.
There’s more…?
The Drone 2 really is feature packed, the clamping feed and venting ASA are the same as those used on the Cyborg 6, and the wrap around grip, board shapes and trigger designs are compatible giving you all the options enjoyed by the high-end gun users and true professionals. The Drone 2 is solid and powerful out of the box, and highly upgradeable in the bargain.
If your Drone 2 marker is not functioning as expected, please check this page first, before you contact technical support. It may be caused by something simple, which you can fix yourself, helping you to get onto the field faster.
Drone 2 shoots well in single shot, but velocity falls away shooting a string
This is usually caused by an over tightened back cap or over tightened drive. Please be sure not to tighten your back cap too much, it should be tightened only until you feel it hit the drive, do not continue to tighten further, this may crush your drive.
If your back cap has been over tightened, undo the back cap, and remove the drive. Unscrew the two halves, and screw them back together, tighten them together just enough that they do not come loose by themselves.
Slide your drive back in and replace the back cap screwing it in only until you feel it hit the drive. Do not continue to tighten. If this doesn’t not solve your problem, please contact your local tech or customer support.
Drone 2 does not shoot, when I pull the trigger, the bolt doesn’t really move, or shoots weakly
This is usually caused by a worn or dry #19 inside the keg. If you remove the drive, change this o-ring, and relube with Militia Lube, you will be up and running in no time. You will find it easier to use a non scratching tool to remove this o-ring, like a household wooden toothpick. Don’t use something that can scratch or damage your keg.
If changing the #19 o-ring does not help, please try a fresh battery.
Another cause may the the dwell setting on your gun, please make sure it is set to 10ms or above. In very cold weather (below 10C or 50F), don’t be afraid to increase your dwell to 14ms.
Drone 2 does not shoot, and makes no noise at all
Please check these things:
– The air is turned on
– Your gun has a fresh battery, and the battery meter reads full
– The trigger is pressing the microswitch on the board
– press and hold the trigger for two seconds, this should force a shot. If the gun fires, then it means your eyes need cleaning.
When I shoot a string of paint, the gun seems to shoot down (lower velocity)
This is usually caused by a dry drivetrain. Please clean the old grease from your drive, and re-grease it with Militia Lube – paying attention to the keg inner o-rings and bolt.
My first shot is too high over the chrono
If your gun seems to build to a high shot when you let it sit for a little while, you probably have a slow leak in your regulator. To rectify this, follow these simple steps:
1. Degas your marker completely – MAKE SURE IT IS FULLY DEGASSED.
2. Remove the left hand side of your wrap around grip so that you can access the regulator screw.
3. Unscrew the regulator and remove it from the gun. Use a spanner and allen key to split the regulator in half.
4. Inspect and reverse the seat. Inspect the piston face for damage. Replace either of these items if they are damaged.
5. Replace and re-chrono your gun.
My first shot is weak, then the gun fires with more power
Please check these things:
1. The battery is fresh
2. The dwell is set to at least 10ms
3. The drive is clean and greased
Drone 2 not turning on
If your Drone 2 does not power on at all, then your problem must be in the electronic system. Please try these things:
1. Replace your battery with a new one.
2. Check that your battery connector is fully plugged in (both to the battery and board), and is not broken.
3. Check that the on/off button on the back of your board is being pressed.
4. Check that your board is not wet or damaged.
Drone 2 leaking down the barrel
A leak that seems to be coming down the barrel from your drive, is usually caused by the #14 o-ring on the valve. Please change this for a new one, and it should solve your problem.
Drone 2 using too much air
If your Drone is using more air than you expect, please verify that there is not a leak in your gun or air system. You should be able to hear a leak if you take the gun someplace quiet. Most leaks are caused by failed o-rings or loose ASAs etc.
If there is no external leak, please check that your dwell is set to around 10ms. If it is set very high, your Drone will use a lot of air.
Drone Agent Mac Os 11
Check to be sure your gun has a reasonable paint to barrel match. If your paint is too loose in the barrel, you will waste air during the shot.
How do I know if my battery is OK?
Drone Agent Mac Os Download
Watch the display when you turn the Drone on. If it immediately goes to a solid colour, your battery is OK. If it flashes yellow a few times before going a solid colour, your battery is dead and should be changed. A low battery will make your gun shoot poorly, or not at all.
Resources
Drone Agent Mac Os X
Drone 2 Exploded view
Click on the drawing to see a full list of parts and part numbers. If you talk to a MacDev tech, you can use the unique part number to identify the part exactly. You will also find that part numbers are an easy way to search the MacDev store for spare parts.
Maintenance tips
– Never overtighten the drive parts or your back cap, it may cause damage to the delrin drive.
– Clean off and replace old grease occasionally. Dirty grease will wear out your gun seals and parts.
– Use MacDev Militia Lube for best results.
– Replace your detents if they get out of shape.
– Replace your battery before an important tournament – to ensure your gun is running at its best!